Why I Created Comfort-Truss: The Story Behind the Hernia Belt

Comic illustration of George's brother joking that his bulky hernia belt looked like a diaper

Comfort-Truss didn't start because I saw a gap in the market and decided a hernia belt would be a good product to sell.

It started because I had an inguinal hernia myself, and I couldn't find a hernia belt I actually wanted to wear.

I tried basically everything I could find. Most of the belts were built around the same general idea: thick elastic straps, bulky hardware and big convex pads that pushed into the hernia site.

They just didn't work for the way I lived.

I wanted something I could put on in the morning, wear directly against my skin and forget about for the rest of the day.

The moment that finally pushed me to make my own

One day I came home from surfing and was in the kitchen with my brother.

I was still wearing my board shorts and didn't have a shirt on. I bent down to grab a pan from one of the cabinets, and the hernia belt I was wearing was sticking up above the waistband of my shorts.

My brother looked at me and said:

“What are you wearing? Is that a diaper or something?”

That was pretty much it.

I remember thinking, I can't keep walking around wearing this thing.

So instead of continuing to look for a better hernia belt, I decided to see if I could make one myself.

The first Comfort-Truss was made from an old wetsuit

I knew what I wanted the belt to do because I knew everything I didn't like about the ones I'd already tried.

It needed to be thin and flexible. It needed to be comfortable enough to wear directly against my skin. I didn't want bulky buckles or hardware. And I wanted a flat pad instead of a big convex pad digging into the hernia site.

Most importantly, it still had to provide enough support to keep my hernia reduced while I was doing the things I normally did.

Surfing. Working out. Sitting at my desk. Playing drums. Just living my normal life.

The first prototype I made was literally cut out of an old wetsuit top.

When I put it on, I was amazed at how comfortable it felt compared with the belts I'd been wearing. It also did a great job of keeping my hernia contained.

There was just one problem.

It was hot.

I live in Florida. As soon as I walked outside wearing it, I started sweating underneath the material. Before long, the sweat was soaking into my clothes.

So the design worked.

The material didn't.

Finding the material that made the idea work

That sent me looking for a material that had the flexibility and comfort I liked about the wetsuit material without trapping all that heat against my body.

I contacted different suppliers and ordered a bunch of samples.

Eventually I found a 3mm material that had the characteristics I was looking for and was breathable enough to wear throughout the day.

That's when the idea really started coming together.

But something working for me didn't necessarily mean it would work for everyone else.

So I made about 20–25 of them

At the time, I was writing a blog about my experience dealing with an inguinal hernia.

Through that blog, I had gotten to know other guys who were dealing with the same problem and looking for a way to keep their hernias under control while getting through everyday life.

So I made about 20–25 belts myself on a little home sewing machine and sent them out for people to try.

The feedback was really encouraging, but it also showed me something important.

Some people needed more padding than I did.

So I changed the design to include a pad pocket and made the pad interchangeable. That allowed someone to adjust the amount of localized pressure depending on what worked best for them.

Then I made another round and sent them back out.

This time the response was basically:

“You need to sell these.”

That's when Comfort-Truss became a business

Up until then, I had really just been trying to solve my own problem.

But I started looking into how common inguinal hernias actually were and realized there were a lot of people dealing with exactly the same frustrations I had been dealing with.

So I set up manufacturing, built a website and started selling Comfort-Truss online.

That was in 2016.

What started with an old wetsuit and a home sewing machine eventually became a product we've now been making for more than 10 years and shipping to people around the world.

The philosophy hasn't changed

The product has evolved over the years.

We've added different models, different pad options and the Heavy Duty Comfort-Truss for people who need more structure and support than the original 3mm Minimalist provides.

But the reason behind Comfort-Truss really hasn't changed from the reason I made that first belt for myself.

Put it on, forget about the hernia — and forget about the hernia belt too.

I didn't want my hernia becoming the center point of my life.

And I didn't want the solution to become something I had to think about all day either.

That's still what I want Comfort-Truss to do for people today.

See the belts that came out of that first prototype

Comfort-Truss hernia belts are designed to provide low-profile support that can be worn directly against your skin, all day, every day.

Explore Comfort-Truss Hernia Belts

— George Hirst
Founder, Comfort-Truss

George Hirst

George Hirst is the creator of the Comfort-Truss hernia belt and the voice behind its blog. As an athlete determined to continue living an active life without surgery, and frustrated by the lack of comfortable, functional options after his own hernia diagnosis, he developed a solution that could keep up with an active lifestyle. His writing draws on deep personal experience, insights from a large community of hernia sufferers, and a commitment to helping others manage their condition without giving up the activities they love.